ZyXEL Communications USG-100@USG-200 - V2.20 ED 2 - Page 895

Chapter 51 Log and Report
ZyWALL USG 100/200 Series User’s Guide
895
The following table describes the fields in this screen.
Table 260 Configuration > Log & Report > Log Setting > Active Log Summary
LABEL DESCRIPTION
System Log Use the System Log drop-down list to change the log settings for all of
the log categories.
disable all logs (red X) - do not log any information for any category
for the system log or e-mail any logs to e-mail server 1 or 2.
enable normal logs (green check mark) - create log messages and
alerts for all categories for the system log. If e-mail server 1 or 2 also
has normal logs enabled, the ZyWALL will e-mail logs to them.
enable normal logs and debug logs (yellow check mark) - create log
messages, alerts, and debugging information for all categories. The
ZyWALL does not e-mail debugging information, even if this setting is
selected.
USB Storage Use the USB Storage drop-down list to change the log settings for
saving logs to a connected USB storage device.
disable all logs (red X) - do not log any information for any category to
a connected USB storage device.
enable normal logs (green check mark) - create log messages and
alerts for all categories and save them to a connected USB storage
device.
enable normal logs and debug logs (yellow check mark) - create log
messages, alerts, and debugging information for all categories and save
them to a connected USB storage device.
E-mail Server
1
Use the E-Mail Server 1 drop-down list to change the settings for e-
mailing logs to e-mail server 1 for all log categories.
Using the System Log drop-down list to disable all logs overrides your
e-mail server 1 settings.
enable normal logs (green check mark) - e-mail log messages for all
categories to e-mail server 1.
enable alert logs (red exclamation point) - e-mail alerts for all
categories to e-mail server 1.
E-mail Server
2
Use the E-Mail Server 2 drop-down list to change the settings for e-
mailing logs to e-mail server 2 for all log categories.
Using the System Log drop-down list to disable all logs overrides your
e-mail server 2 settings.
enable normal logs (green check mark) - e-mail log messages for all
categories to e-mail server 2.
enable alert logs (red exclamation point) - e-mail alerts for all
categories to e-mail server 2.