Chapter 9 VDSL Setup
VES1724-56 User’s Guide
109
9.3.2 VDSL Line Profile Setup > Rate Adaptive
Click the Modify link next to the Rate Adaptive field in the VDSL Line Profile Setup screen to
open the screen as shown next. Use the screen to configure detailed VDSL rate adaptive settings.
Figure 56 VDSL Rate Adaptive Setup
The following table describes the labels in this screen.
Applied Ports This field displays the VDSL port number(s) to which this profile is applied.
You can apply a VDSL line profile to a VDSL template in the VDSL Setup > VDSL
Profile > VDSL Template Setup screen.
Delete Check the rule(s) that you want to remove in the Delete column and then click the
Delete button.
Cancel Click Cancel to clear the selected checkboxes in the Delete column.
Table 34 VDSL Line Profile Setup (continued)
LABEL DESCRIPTION
Table 35 VDSL Rate Adaptive Setup
LABEL DESCRIPTION
DownStream Configure the following settings for the Switch-to-CPEs direction.
UpStream Configure the following settings for the CPEs-to-the-Switch direction.
To Next Page
Loading...
