Chapter 9 VDSL Setup
VES1724-56 User’s Guide
122
Click VDSL Setup and VDSL Alarm Profile in the navigation panel to display the screen as shown.
Use this screen to view, add, edit, and delete VDSL alarm profile templates. One VDSL alarm profile
template specifies one VDSL line alarm profile and one VDSL channel alarm profile.
Figure 65 VDSL Alarm Template Setup
The following table describes the labels in this screen.
9.4.1 VDSL Line Alarm Profile Setup
Click the LineAlarmProfile link at the top-right corner of the VDSL Alarm Template Setup
screen to display the screen as shown. Use this screen to view, add, edit, or delete a VDSL line
alarm profile.
Table 43 VDSL Alarm Template Setup
LABEL DESCRIPTION
Name Enter a descriptive name for identification purposes.
Line Alarm Profile Select a line alarm profile for this VDSL alarm profile template. You can configure line
alarm profiles by clicking the LineAlarmProfile link in the top-right corner of the screen.
Channel Alarm
Profile
Select a channel alarm profile for this VDSL alarm profile template. You can configure
channel alarm profiles by clicking the ChanAlarmProfile link in the top-right corner of the
screen.
Add Click Add to save the new VDSL template to the Switch. It then displays in the summary
table at the bottom of the screen.
Cancel Click Cancel to reset the fields to your previous configuration.
Clear Click Clear to clear the fields to the factory defaults.
Name This field displays the descriptive name for each configured VDSL template.
LineAlarmprofile This field displays the line alarm profile name for each VDSL alarm profile template.
ChannelAlarmprofi
le
This field displays the channel alarm profile name for each VDSL alarm profile template.
Applied Ports This field displays the VDSL port number(s) to which this template is applied.
Delete Check the rule(s) that you want to remove in the Delete column and then click the Delete
button.
Cancel Click Cancel to clear the selected checkboxes in the Delete column.
To Next Page
Loading...
