ZyXEL Communications VES1724-56 - Bonding Group Details

Chapter 7 System Status and Port Statistics
VES1724-56 User’s Guide
65
7.2.3 Bonding Group Details
Click a VDSL port's bonding group name in the Group column of the Port Status screen to display
the following screen. Use this screen to check status for an individual VDSL bonding group on the
Switch.
Figure 33 Port Status: Bonding Group Details
The following table describes the labels in this screen.
Table 8 Port Status: Bonding Group Details
LABEL DESCRIPTION
Group Status
Group Name This shows the name of the VDSL port bonding group.
Member Port This shows the ports in this bonding group.
Active Port This shows the port(s) with connections up in this bonding group.
Main Port This field displays the lower-numbered port in the VDSL port bonding group. This is the
main port. The Switch records data sent and received counters based on this port.
Transfer Mode This field displays the traffic type (PTM or ATM) of this bonding group.
Packet Transfer Mode (PTM) is packet-oriented and supported by the VDSL2 standard.
Asynchronous Transfer Mode (ATM) is a connection-oriented and cell-switching
technology. It is supported by the ADSL/ADSL2/ADSL2+ standards.
Bonding Rate US This field displays the current upstream rate for this bonding group.
Bonding Rate DS This field displays the current downstream rate for this bonding group.
Group Counter
Group Name This shows the name of the VDSL port bonding group.
rxSmallFragments The size of all data fragments should be the same and it is negotiated by the Switch and
individual VDSL CPEs.
This shows the number of data fragments this group dropped due to being smaller than
the negotiated size..