ZyXEL Communications VES1724-56 - Logging out of the Web Configurator; Help

Chapter 4 The Web Configurator
VES1724-56 User’s Guide
41
6 After a configuration file upload, type atgo to restart the Switch.
Figure 17 Resetting the Switch: Via the Console Port
The Switch is now reinitialized with a default configuration file including the default password of
“1234”.
4.7 Logging Out of the Web Configurator
Click Logout in a screen to exit the Web Configurator. You have to log in with your password again
after you log out. This is recommended after you finish a management session for security reasons.
Figure 18 Web Configurator: Logout Screen
4.8 Help
The Web Configurator’s online help has descriptions of individual screens and some supplementary
information.
Click the Help link from a Web Configurator screen to view an online help description of that
screen.
Bootbase Version: V56Fanless | 10/23/2012 11:00:25
RAM: Size = 131072 Kbytes
DRAM POST: Testing: 23488K
OK
FLASH: AMD 128M *1
ZyNOS Version: V56_Fanless130626 | 06/26/2013 10:21:50
Press any key to enter debug mode within 3 seconds.
ras> atlc
Starting XMODEM upload (CRC mode)....
CCCCCCCCCCCCCCCC
Total 393216 bytes received.
Erasing..
................................................................
OK
ras> atgo