VES1724-56 User’s Guide 42
CHAPTER 5
Initial Setup Example
This chapter shows how to set up the Switch for an example network.
5.1 Overview
The following lists the configuration steps for the initial setup:
• Configure the Switch IP management address
• Create a VLAN
• Set port VLAN ID
5.2 Configuring Switch Management IP Address
The default management IP address of the Switch is 192.168.1.1. You can configure another IP
address in a different subnet for management purposes. The following figure shows an example.
Figure 19 Initial Setup Example: Management IP Address
1 Connect your computer to an in-band Ethernet port on the Switch. Make sure your computer is in
the same subnet as the Switch.
2 Open your web browser and enter 192.168.1.1 (the default IP address) in the address bar to access
the Web Configurator. See Section 4.2 on page 33 for more information.
Internet
VLAN2
VLAN1
192.168.1.x
192.168.2.x
To Next Page
Loading...
