ZyXEL Communications VES1724-56 - Configuring Management IP Address

Chapter 6 Tutorials
VES1724-56 User’s Guide
48
6 Click the VLAN Status link in the Static VLAN screen and then the VLAN Port Setting link in the
VLAN Status screen.
Figure 25 Tutorial: Click the VLAN Port Setting Link
7 Enter 102 in the PVID field for ports 2 and 18 to add a tag to incoming untagged frames received
on these ports so that the frames are forwarded to the VLAN group that the tag defines. Click
Apply.
Figure 26 Tutorial: Set PVID for untagged frames received on Ports 2 and 18
8 Click the Save link in the upper right corner of the Web Configurator to save your configuration
permanently.
6.1.3 Configuring Management IP Address
Follow the steps below to specify a management IP address for VLAN 102 and the IP address of the
default gateway, an IEEE 802.1Q VLAN-aware layer-3 switch or router that helps forward DHCP
packets to the DHCP server.
1 Click Basic Setting > IP Setup.
2 For the VLAN 102 network, enter 192.168.2.1 as the IP address and 255.255.255.0 as the subnet
mask.