ZyXEL Communications VES1724-56 - CFM MD

Chapter 28 CFM
VES1724-56 User’s Guide
277
28.3 CFM MD
Click the link CFM MD on the CFM MA screen to open this screen. Use this screen to create an MD
and specify an MD level. Refer to Section 28.1 on page 274 for more information about CFM.
Figure 169 CFM MD
The following table describes the labels in this screen.
MA Name This field displays the descriptive name of the MA.
MA VID This field displays the ID number of the MA VLAN group.
MEP Port This field lists individual MEP ports in this MA VLAN group.
MIP Port This field lists individual MIP ports in this MA VLAN group.
Delete Select rules to remove in the Delete column and then click the Delete button to remove them.
Cancel Click Cancel to clear the Delete check boxes.
Table 123 CFM MA
LABEL DESCRIPTION
Table 124 CFM MD
LABEL DESCRIPTION
MD Name Type a name (up to 40 printable ASCII characters) for this MD. This is for identification
purposes.
MD Level Type a level number (0-7) for this MD.
Add Click Add to add the settings as a new entry in the summary table below.
Cancel Click Cancel to reset the fields.
Clear Click Clear to start configuring the screen again.
Index This field displays the index number for the record in this summary table.
MD Name This field displays the descriptive name of the MD.
MD Level This field displays the level number of the MD.
Delete Check the rule(s) that you want to remove in the Delete column and then click the Delete
button.
Cancel Click Cancel to clear the Delete check boxes.