Chapter 14 Spanning Tree Protocol
VES1724-56 User’s Guide
171
14.8 Configure Multiple Spanning Tree Protocol
To configure MSTP, click MSTP in the Advanced Application > Spanning Tree Protocol screen.
See Section 14.1.5 on page 162 for more information on MSTP.
Figure 103 Advanced Application > Spanning Tree Protocol > MSTP
Port ID This is the priority and number of the port on the Switch through which this Switch must
communicate with the root of the Spanning Tree.
Topology Changed
Times
This is the number of times the spanning tree has been reconfigured.
Time Since Last
Change
This is the time since the spanning tree was last reconfigured.
Table 67 Advanced Application > Spanning Tree Protocol > Status: MRSTP (continued)
LABEL DESCRIPTION
To Next Page
Loading...
