Chapter 10 VLAN
VES1724-56 User’s Guide
132
10.5 Static VLAN
Use a static VLAN to decide whether an incoming frame on a port should be
• sent to a VLAN group as normal depending on its VLAN tag.
• sent to a group whether it has a VLAN tag or not.
• blocked from a VLAN group regardless of its VLAN tag.
You can also tag all outgoing frames (that were previously untagged) from a port with the specified
VID.
10.5.1 Static VLAN Status
See Section 10.1 on page 129 for more information on Static VLAN. Click Advanced Application >
VLAN from the navigation panel to display the VLAN Status screen as shown next.
Figure 72 Advanced Application > VLAN: VLAN Status
The following table describes the labels in this screen.
Table 48 Advanced Application > VLAN: VLAN Status
LABEL DESCRIPTION
The Number of
VLAN
This is the number of VLANs configured on the Switch.
Index This is the VLAN index number. Click on an index number to view more VLAN details.
VID This is the VLAN identification number that was configured in the Static VLAN screen.
Elapsed Time This field shows how long it has been since a normal VLAN was registered or a static VLAN
was set up.
To Next Page
Loading...
