Chapter 32 PPPoE IA
VES1724-56 User’s Guide
290
32.2 The PPPoE IA Status Screen
Click Advanced Application > PPPoE IA Configuration in the navigation panel to display the
screen as shown. Use this screen to view the PPPoE Intermediate Agent status on the Switch.
Figure 177 Advanced Application > PPPoE IA Status
The following table describes the labels in this screen.
32.3 PPPoE IA Port Tel Configuration
Click Advanced Application > PPPoE IA Configuration in the navigation panel, and then click
the Port Tel link to display the screen as shown.
Use this screen to configure telephone numbers for each port, if you want to add them into PPPoE
IA option 82 tags. See more information in the Advanced Application > PPPoE IA
Configuration > Global (see Section 32.4 on page 291) or Advanced Application > PPPoE IA
Configuration > VLAN screen (see Section 32.5 on page 293).
Figure 178 Advanced Application > PPPoE IA Configuration > Port Tel
Table 133 Advanced Application > PPPoE IA Status
LABEL DESCRIPTION
PPPoE IA Mode This field displays:
• None: if the PPPoE intermediate agent is disabled on the Switch.
• Global: if the Switch is configured to add the same subscriber line specific information to
all PPPoE discovery packets it receives.
• VLAN: followed by a VLAN ID or multiple VLAN IDs if the Switch is configured to add
subscriber line specific information to PPPoE discovery packets in specific VLAN(s).
To Next Page
Loading...
