ZyXEL Communications VES1724-56 - VDSL Channel Alarm Profile Setup

Chapter 9 VDSL Setup
VES1724-56 User’s Guide
124
9.4.2 VDSL Channel Alarm Profile Setup
Click the ChanAlarmProfile link at the top-right corner of the VDSL Alarm Template Setup
screen to display the screen as shown. Use this screen to view, add, edit, modify a VDSL channel
alarm profile.
The device sends an alarm trap and generates a syslog entry when the thresholds of the alarm
profile are exceeded.
Figure 67 VDSL Channel Alarm Profile Setup
Add Click Add to save the new rule to the switch. It then displays in the summary table at the
bottom of the screen.
Cancel Click Cancel to reset the fields to your previous configuration.
Clear Click Clear to clear the fields to the factory defaults.
Name This field displays the descriptive name for the alarm profile.
FECS This field displays the number of Forward Error Correction Seconds (FECS) that are
permitted to occur within 15 minutes.
ES This field displays the number of Errored Seconds (ES) that are permitted to occur within
15 minutes.
SES This field displays the number of Severely Errored Seconds (SES) that are permitted to
occur within 15 minutes.
LOSS This field displays the number of Loss Of Signal Seconds (LOSS) that are permitted to
occur within 15 minutes.
UAS This field displays the number of seconds the interface is permitted to be unavailable
within 15 minutes.
Applied Ports This field displays the VDSL port number(s) to which this profile is applied.
Delete Check the rule(s) that you want to remove in the Delete column and then click the Delete
button.
Cancel Click Cancel to clear the selected checkboxes in the Delete column.
Table 44 VDSL Line Alarm Profile Setup (continued)
LABEL DESCRIPTION