Chapter 6 Tutorials
VES1724-56 User’s Guide
49
3 In the VID field, enter the ID of the VLAN group (102 in this example) to which you want this
management IP address to belong.
4 Enter the IP address of the default gateway (192.168.2.254 for example) in the Default Gateway
field.
5 Click Add.
Figure 27 Tutorial: Set Management IP Address for VLAN 102
6 Click the Save link in the upper right corner of the Web Configurator to save your configuration
permanently.
6.1.4 Configuring DHCP VLAN Settings
Follow the steps below to have the Switch act as a DHCP relay agent for the specified VLAN and
allow the Switch to add relay agent information (such as the VLAN ID) to DHCP requests.
Note: Make sure you have disabled global DHCP relay in the IP Application > DHCP >
Global screen before you configure DHCP relay per VLAN settings.
To Next Page
Loading...
