Chapter 6 Tutorials
VES1724-56 User’s Guide
47
2 Go to Basic Setting > Switch Setup and set the VLAN type to 802.1Q. Click Apply to save the
settings to the run-time memory.
Figure 23 Tutorial: Set VLAN Type to 802.1Q
3 Click Advanced Application > VLAN > Static VLAN.
4 In the Static VLAN screen, select ACTIVE, enter a descriptive name (VLAN 102 for example) in
the Name field and enter 102 in the VLAN Group ID field.
5 Select Fixed to configure ports 2 and 18 to be a permanent member of this VLAN. To ensure the
VLAN-unaware devices, such as computers can receive frames properly, clear the Tx Tagging
check box for port 2 to have the Switch remove VLAN tags before sending. Click Add.
Figure 24 Tutorial: Create a Static VLAN
To Next Page
Loading...
