Chapter 15 Broadcast Storm Control
VES1724-56 User’s Guide
177
Broadcast (pkt/
s)
Select this option and specify how many broadcast packets the port receives per second.
Multicast (pkt/s) Select this option and specify how many multicast packets the port receives per second.
DLF (pkt/s) Select this option and specify how many destination lookup failure (DLF) packets the port
receives per second.
Apply Click Apply to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Cancel Click Cancel to reset the fields.
Table 70 Advanced Application > Broadcast Storm Control (continued)
LABEL DESCRIPTION
To Next Page
Loading...
