ZyXEL Communications VES1724-56 - Page 36

Chapter 4 The Web Configurator
VES1724-56 User’s Guide
36
In the navigation panel, click a main link to reveal a list of submenu links.
The following table describes the links in the navigation panel.
Table 4 Navigation Panel Sub-links Overview
BASIC SETTING VDSL SETUP
ADVANCED
APPLICATION
IP APPLICATION MANAGEMENT
Table 5 Navigation Panel Links
LINK DESCRIPTION
Basic Settings
System Info This link takes you to a screen that displays general system and hardware monitoring
information.
General Setup This link takes you to a screen where you can configure general identification information
about the Switch.
Switch Setup This link takes you to a screen where you can set up global Switch parameters such as
VLAN type, MAC address learning, GARP and priority queues.
IP Setup This link takes you to a screen where you can configure the management IPv4/IPv6
address, subnet mask (necessary for Switch management) and DNS (domain name server)
and set up to 64 IPv4 routing domains.
External Alarm
Switch
This link takes you to a screen where you can view the status of each external alarm input
and configure their settings.
Port Setup This link takes you to a screen where you can configure settings for individual Switch ports.
Rate Limit Profile
Setup
This link takes you to screens where you can configure the ingress and egress rate limit
profiles to apply to ports. You can use this setting in the Basic Setting > Port Setup later.
Hardware Alarm
Profile
This link takes you to a screen where you can configure alarm thresholds.
CPE Port Status This link takes you to a screen where you can view all DSL port status and details about the
connected CPE devices.
IPv6 Setup This link takes you to a screen where you can configure the IPv6 settings.
SFP Threshold
Setup
This link takes you to a screen where you can configure warning or alarm thresholds for the
SFP slots of the Switch.