3D Systems, Inc.
26
SOFTWARE OVERVIEW
NOTE: Please see the section New Functionality for GUI v1.1.5443 on pg. 42.
The touchscreen of the ProX 800 uses 3D Systems’ Print3D Pro™ printer controller software. The Print3D Pro runs on a Google™
Nexus 10™ tablet running the Android™ operating system which provides standard functionality for navigation, notications,
and application control. For further information, refer to the Nexus 10 documentation: http://www.nexus10manual.net/wp-
content/uploads/2012/12/Samsung-Google-Nexus-10-User-Manual.pdf
HOME SCREEN
When the tablet is powered on, there should be a Print3D Pro icon (A) displayed on the Home screen. Tap the icon to launch the
application. If the icon is not present, tap the All Apps button (E) and select Print3D Pro from the apps displayed.
10
Print3D Pro Application Icon: Press this icon to
launch the Print3D Pro application.
Back: Opens the previous screen you were working in,
even if it was in a different application (app).
Home: Navigates to the Home Screen. If you are
viewing an alternate Home screen, this opens the
central Home screen.
Recent Apps: Opens a list of thumbnail images of apps
you have worked with recently. To open an app, touch
it. To close an app, swipe it left or right.
All Apps: View all of the applications on the device.
A
B
C
D
E
Alerts and Notications: Alerts and messages occur
within the annunciator bar. Swipe down from the top
of the screen with one nger to view the notications.
Google Search Bar: Open Google’s search engine.
Voice Input: Press to activate voice-to-text input.
Status Icons: Various system status indicators appear
here such as Bluetooth, Wi-Fi, & battery status
F
G
H
I
A
F
G
E
B C D
H I
To Next Page
Loading...
Need help?
General
