3D Systems ProX 800 User Manual

3D Systems, Inc.
6
ADDITIONAL DOCUMENTATION
The following documents provide additional information on the ProX 800 SLA system.
ProX 800 FACILITY GUIDE
The Facility Guide details the requirements necessary to install the ProX 800 3D Printer. Details include the necessary facility
dimensions, electrical and pneumatic resources, and any equipment that may be needed for installation.
ProX 800 MATERIAL GUIDES
The Material Guides detail the use of materials that have been certied for use with the ProX 800. Each material has its own
Material Guide. Information specic to each material is included in the guides.
ProX 800 MATERIAL SAFETY DATA SHEETS AND SAFETY DATA SHEETS (MSDS/SDS)
Each material has its own MSDS/SDS. The user must be familiar with all information contained in these documents before
handling the materials. Every material shipment includes a paper copy of its MSDS/SDS.
Electronic versions of each MSDS/SDS are available on our website at http://www.3dsystems.com/support/materials/msds
3D SPRINT™ SOFTWARE DOCUMENTATION
3D Sprint is the 3D Systems’ software application used for preparing CAD models to be printed on an SLA printer. It is installed
on a standalone computer which is provided by the customer.
3

3D Systems ProX 800 Specifications

General

Brand	3D Systems
Model	ProX 800
Category	3D Printers
Language	English