3D Systems ProX 800 User Manual

3D Systems, Inc.
41
BUILD SETTINGS SCREEN
The Build Settings Screen allows the user to turn the Auto Drain and Smart Sweep on or off.
Auto Drain automatically lifts the print pad from the MDM after the print is nished so that the excess material drains off of the
part.
Smart Sweep connes the sweeper motion to only the area of the parts being printed. This is the default mode.
ProX 800

3D Systems ProX 800 Specifications

General

Brand	3D Systems
Model	ProX 800
Category	3D Printers
Language	English