3D Systems ProX 800 - Printer Settings Menu; Printer Connection Settings; Printer Information Settings; Network Settings

3D Systems, Inc.
36
SETTINGS SCREEN
The Settings Screen allows you to navigate to the settings screens for various components of the printer.
Printer Connection: Navigate to the Printer Connection Settings screen. See the section “Manual Printer Connection
Screen” on page 37.
Printer Information: Navigate to the Printer Information Settings screen. See the section”Printer Information Settings
Screen” on page 38.
Network Settings: Navigate to the Network Settings screen. See the section “Network Settings Screen” on page 38.
Heater Settings: Navigate to the Heater Settings screen. See the section “Heater Settings Screen” on page 39.
Default Scale Factor: Navigate to the Default Scale Factor Settings screen. See the section “Scale Factor Settings
Screen” on page 40.
Build Settings: Navigate to the Build Settings screen. See the section “Build Settings Screen” on page 41.
Drawing Settings: Navigate to the Drawing Settings screen. See the section “Drawing Settings Screen” on page 42.
A
B
C
D
E
F
G
A
B C D E F
G