3D Systems ProX 800 User Manual

3D Systems, Inc.
82
Trapped Volume
During printing, a volume of material within the part that cannot ow out to the surrounding liquid in the MDM.
Triangle normal
A line perpendicular to a triangle starting at its center and pointing away from the mass of the part. Triangle normals are used
to differentiate between inside and outside surfaces of a solid.
Ultraviolet (UV)
Electromagnetic radiation having a wavelength shorter than visible light, (i.e., below 390 nanometers).
Vat
On older SLA Centers, the metal container inside the process chamber that holds the material from which the object is formed.
On the ProX 800, this container is called the MDM.
Vector
A directed line segment represented by starting and ending coordinates as dened in a stereolithography slice or print le.
Zephyr™ Print Applicator System
A print applicator system that uses an internal vacuum cavity to deposit material onto the part.
Z-Stage
See Elevator.

3D Systems ProX 800 Specifications

General

Brand	3D Systems
Model	ProX 800
Category	3D Printers
Language	English