3D Systems ProX DMP 300 User Manual

443D SYSTEMS, INC. PN:80-D27 Rev.B
2. When the lter replacement is completed, click on "Reset" (1).
3. Then, perform the actions (2) : consult the section "Cleaning the laser optic system" on page 61 for details on how to
clean the lens.
4. Click on Next (3) to go to the next step.
1
2
3

3D Systems ProX DMP 300 Specifications

General

Brand	3D Systems
Model	ProX DMP 300
Category	3D Printers
Language	English