Chapter 6. 3ware Disk Manager (3DM 2)
112 3ware Serial ATA RAID Controller User Guide
the start of a new test and is updated after the test completes. A capacity of
zero will also show if the BBU is disconnected and then reconnected.
Under optimal conditions, a battery can protect for up to 72 hours. However,
with a fresh battery, you may see a higher number in this field. As the battery
ages, the backup capacity diminishes.
Last Capacity Test. Indicates the date when the last battery test was
completed. To test the battery click the
Test Battery Capacity link. For
details, see “Testing Battery Capacity” on page 219.
Battery Installation Date. Indicates when the BBU last detected the battery
pack was removed and replaced.
3DM 2 Settings Page
Figure 48. 3DM 2 Settings Page
The 3DM 2 Settings page appears when you click 3DM 2 Settings on the
menu bar. Use this page to set preferences, including email notification for
To Next Page
Loading...
