Setting Up 3DM Preferences
www.3ware.com 81
To set or change the password
1 Click
3DM 2 Settings on the 3DM menu bar.
2 On the 3DM 2 Settings Page, in the
Password section, select the type of
password you want to change:
User or Administrator.
3 Type the current password in the
Current Password field.
If you are changing the password for the first time, the factory-set default
password is
3ware.
4 Enter the new password in the
New Password field and again in the
Confirm New Password field.
5 Click the
Change Password button to enact the change.
Note: If you forget your password, you can uninstall 3DM and then
reinstall it. This will reset the password to the default password,
3ware.
Managing E-mail Event Notification
3DM can notify you when the 3ware RAID controller requires attention, such
as when a disk unit becomes degraded and is no longer fault tolerant.
Event notification can only occur while 3DM is running, so it is
recommended that 3DM be left running on the system that contains the 3ware
RAID controller.
When events occur, notification can be e-mailed to one or more recipients.
You can specify the type of events for which notifications will be sent by
selecting the severity:
•
Information will send e-mails for all alarms
•
Warning will send e-mail for alarms with severity of Warning and Error
only.
•
Error will send e-mail for alarms with severity of Error only.
For more information about events and alarms, see “Viewing Alarms” on
page 175.
Event notification is initially set up during 3DM installation, but can be
changed on the 3DM 2 Settings page.
To Next Page
Loading...
