Chapter 6. 3ware Disk Manager (3DM 2)
78 3ware Serial ATA RAID Controller User Guide
Viewing Information About Different
Controllers in 3DM
If you have more than one controller in the system, you select the one you
want to see details about from the drop-down list at the right of the menu bar.
This drop-down is available on all pages that provide controller-specific
features.
Note: Throughout these instructions, current controller is used to
refer to the controller which is currently selected in this drop-down
list.
Refreshing the Screen
You can refresh the data on the screen at any time by clicking Refresh Page
in the menu bar. This causes 3DM to update the information shown with
current information from the controller and associated drives.
Automatic refreshes can also be set. For details, see “Setting the Frequency of
Page Refreshes” on page 83.
Note: If you click Refresh on the browser window, you will be
taken back to the Summary page.
3DM Screens and What They're Used For
Table 7 shows a list of the pages you work with in 3DM and describes what
they are used for. Details about each page and the fields and features on it are
provided in the section “3DM 2 Reference” on page 84. The page names in
Table 7 provide links to details about that page.
Table 7: List of 3DM Pages
3DM Page Description
Controller Summary
Page
Provides basic information about each 3ware RAID
controller in your system.
To see this page, click Summary in the menu bar.
Controller Details
Page
Provides detailed information about the current controller.
To see this page, choose Information > Controller
Details from the menu bar.
To Next Page
Loading...
