Working with the 3DM Screens
www.3ware.com 79
Unit Information Page Shows a list of the units on the current controller and
provides summary information about each unit.
To see this page, choose Information > Unit Information
from the menu bar or click an ID number on the Controller
Summary.
Unit Details Page Shows details about a particular unit.
To see this page, click an ID number on the Unit
Information page.
Drive Information
Page
Shows a list of drives on the current controller and
provides summary information about each drive.
To see this page, choose Information > Drive
Information from the menu bar.
Drive Details Window Shows the SMART data for a specific drive, and shows
additional detail information for the drive.
To see this page, click the Port # for a drive on the Drive
Information page.
Controller Settings
Page
Lets you view settings that affect the units on the current
controller and change some of those settings.
Controller-level settings include background task rate,
Auto-Rebuild, Auto-Carving, Carve Size, and policies that
can only be changed in the BIOS or CLI.
Unit-level settings include specifying the StorSave Profile
and enabling or disabling the Write Cache, Auto-Verify,
Continue on Error During Rebuild, and Queuing.
To see this page, choose
Management > Controller
Settings from the menu bar.
Scheduling Page Lets you view and change the schedule for tasks that
affect all units on the current controller.
To see this page, choose Management > Scheduling
from the menu bar.
Maintenance Page Lets you configure new units and make changes to
existing units.
To view this page, choose Management > Maintenance
from the menu bar.
Alarms Page Shows a list of alarms, including the specific alarm
message, and the exact date and time it occurred.
To view this page, choose Monitor > Alarms on the menu
bar.
Table 7: List of 3DM Pages
3DM Page Description
To Next Page
Loading...
