Chapter 6. 3ware Disk Manager (3DM 2)
70 3ware Serial ATA RAID Controller User Guide
Notes:
You can start 3DM later by choosing 3DM2 from the
Start/
Programs/3ware/3DM2
menu.
If you change, add, or remove an IP address, or change the
machine name of the machine on which you have installed 3DM 2,
you will need to recreate the security certificate. You can do so by
re-installing 3DM 2, or by deleting the file 3dm2.pem and
restarting the 3DM 2 service. Under Windows, this file is located
in the same directory in which you installed 3DM 2. Under Linux,
the file resides in /etc/3dm2. You may also want to delete the
installed/cached security certificate from your browser.
Uninstalling 3DM under Microsoft Windows
Use the Add or Remove Programs control panel to uninstall 3DM.
• From the
Startup menu, choose Control Panels > Add or Remove
Program
s.
• In the Add or Remove Programs control panel, select 3DM and click
Change/Remove.
Installing 3DM for Linux or FreeBSD
Note: If you downloaded 3DM_Linux.zip from the website, unzip
the file to root (or to any other working directory) and change
Directory (CD) to that directory (for example:
/root). Then start
the following procedure at step 3, substituting
/mnt with /root or
your installation directory.
If you are installing for FreeBSD, replace /linux with /freebsd.
To start the installation
1 Insert the 3ware software installation CD-ROM for Linux into the CD-
ROM drive.
2 Mount the CD-ROM disk:
mount /dev/cdrom /mnt
3 Change the directory and run the install script:
For Linux:
cd /mnt/packages/3dm2/linux
./install.3dm --i
For FreeBSD:
cd /mnt/packages/3dm2/freebsd
./install.3dm --i
To Next Page
Loading...
