AEN Messages
www.3ware.com 225
00Eh Initialize failed
00Fh SMART threshold exceeded
019h Drive removed
01Ah Drive inserted
01Eh Unit inoperable
01Fh Unit operational
020h Prepare for shutdown (power-off)
021h Downgrade UDMA mode
022h Upgrade UDMA mode
023h Sector repair completed
024h Buffer integrity test failed
025h Cache flush failed; some data lost
026h Drive ECC error reported
027h DCB checksum error reported
028h DCB version unsupported
029h Verify started
02Ah Verify failed
02Bh Verify completed
02Ch Source drive ECC error occurred
02Dh Source drive error occurred
02Eh Replacement drive capacity too small
02Fh Verify not started; unit never initialized
030h Drive not supported
032h Spare capacity too small for some units
033h Migration started
034h Migration failed
035h Migration done
036h Verify fixed data/parity mismatch
037h SO-DIMM not compatible
038h SO-DIMM not detected
Table 11: AEN Error Message Summary
Value Message
To Next Page
Loading...
