www.3ware.com 17
Table 5: Initial Default Settings for Policies
Policy Default Value Where to Change
Controller-Level Settings
Auto-Rebuild Enabled 3BM, 3DM, CLI
Auto-Carving Disabled 3BM, 3DM, CLI
Carve Size or Factor 2048 3BM, 3DM, CLI
Drives Per Spinup 1 3BM, CLI
Delay Between Spinup 6 seconds 3BM, CLI
Export Unconfigured (JBOD)
Disks
Disabled 3BM, CLI
Disable Cache on Degraded
Array (does not apply to
9550SX and 9590SE
controllers because this
feature is integrated into
StorSave Profile)
Enabled CLI, 9.2 version of
3BM (not 3BM 2)
Staggered Method ATA-6 3BM
Staggered Spinup Enabled 3BM
Unit-Level Settings
Auto-Verify Disabled 3DM, CLI
Continue on Source Error
During Rebuild
Disabled 3BM, 3DM, CLI
Boot Volume Size Blank 3BM
Queuing (NCQ) Disabled 3BM, 3DM, CLI
StorSave Profile Protection 3BM, 3DM, CLI
Write Cache Enabled 3BM, 3DM, CLI
Background Task Settings
Verify Task Schedules
Daily,
starting at 12:00 am
and running for 24 hours
3DM, CLI
Follow Verify Task Schedule No 3DM, CLI
Rebuild Task Schedules
Daily,
starting at 12:00 am
and running for 24 hours
3DM, CLI
Follow Rebuild Task
Schedule
No 3DM, CLI
Self-test Task Schedules
Daily,
starting at 12:00 am
and running for 24 hours
3DM, CLI
Follow Self-test Task
Schedule
Yes 3DM, CLI
To Next Page
Loading...
