Chapter 5. 3ware BIOS Manager 2 (3BM 2)
56 3ware Serial ATA RAID Controller User Guide
Normally your 3ware configuration remains on-screen for just a few
seconds. However, if a unit has degraded, the screen indicates the
problem and remains on your screen longer.
4 If you have more than one 9000-series controller in your system, a screen
lists the available boards. (See Figure 25.) In this case, highlight the board
with which you want to work and press Enter.
Figure 25. AMCC Boards Selection Screen
You see a screen similar to Figure 26, warning you that changing your
disk array configuration may overwrite data on the disks.
5 If you plan to make changes to your configuration and need to backup
data before continuing, press ESC and do so now. Otherwise, press any
key to continue.
Figure 26. Warning Message When you Start 3BM
If 3BM detects a degraded array, a red message box appears, to alert you
to the problem. For information about rebuilding a degraded array, see
“Rebuilding Units” on page 189.
To Next Page
Loading...
