ABB 620 Series - Measurands in Monitor Direction; Generic Functions in Monitor Direction; Selection of Standard Information Numbers in Control Direction; System Functions in Control Direction

3.3.3.7 Measurands in monitor direction
INF Semantics
⊠ <144> Measurand I
⊠ <145> Measurands I, V
⊠ <146> Measurands I, V, P, Q
⊠ <147> Measurands I
N
, V
EN
⊠ <148> Measurands I
L1,2,3
, V
L1,2,3
, P, Q, f
3.3.3.8 Generic functions in monitor direction
INF Semantics
 <240> Read headings of all defined groups
 <241> Read values or attributes of all entries of one group
 <243> Read directory of a single entry
 <244> Read value or attribute of a single entry
 <245> End of general interrogation of generic data
 <249> Write entry with confirmation
 <250> Write entry with execution
 <251> Write entry aborted
3.3.4 Selection of standard information numbers in control
direction
3.3.4.1 System functions in control direction
INF Semantics
⊠ <0> Initiation of general interrogation
⊠ <0> Time synchronization
3.3.4.2 Generic functions in monitor direction
INF Semantics
 <240> Read headings of all defined groups
 <241> Read values or attributes of all entries of one group
 <243> Read directory of a single entry
 <244> Read value or attribute of a single entry
 <245> End of general interrogation of generic data
 <249> Write entry with confirmation
 <250> Write entry with execution
 <251> Write entry aborted
1MRS757657 A Section 3
Interoperability profile for 620 series IEC 60870-5-103
REM620 59
Point List Manual