Application macros
What this chapter contains
This chapter describes the intended use, operation and default control connections
of the application macros.
More information on the connectivity of the control unit is given in the
Hardware
manual
of the drive.
General
Application macros are sets of default parameter values suitable for the application
in question. When starting up the drive, the user typically selects the best-suited
application macro as a starting point, then makes any necessary changes to tailor
the settings to the application. This usually results in a much lower number of user
edits compared to the traditional way of programming a drive.
Application macros can be selected by parameter 96.4 Macro select. User parameter
sets are managed by the parameters in group 96 System (page 602).
7
Application macros 149
To Next Page
Loading...
