Speed reference
75.19
75.18
75.23
75.15
76.11
Speed reference
controlled by ESP
process controller
Time
Settings and diagnostics
Parameter group 75 ESP reference setup (page 525) and 76 ESP automatic
control (page 532).
Events: -
Underload and overload protection
Load protection functions can constantly monitor selected load signal against
defined limit which are fixed along the motor speed range or vary according to
the load curve settings.
Each underload and overload protection function limit type can be configured
separately for the user defined any kind of work-zone in terms of load conditions.
ESP program features 55
To Next Page
Loading...
