By default, the set of parameters included in the calculation contain most
parameters with the exception of
• actual signals
• parameter group 47
• parameters that are activated to validate new settings (such as 51.27 and 96.7)
• parameters that are not saved to the flash memory (such as 96.24…96.26)
• parameters that are internally calculated from others (such as 98.9…98.14).
• dynamic parameters (eg. parameters that vary according to hardware), and
• application program parameters.
The default set can be edited using the Drive customizer PC tool.
Settings and diagnostics
Parameters: 96.53 Actual checksum (page 610)…96.59 Approved checksum
4 (page 611).
Events: 6200 Checksum mismatch (page 662) and A686 Checksum
mismatch (page 677).
Program features 141
To Next Page
Loading...
