Introduction to the manual
What this chapter contains
This chapter describes the contents of the manual. It also contains information
on the compatibility, safety and intended audience.
Applicability
This manual applies to the ACS880 ESP control program (option +N5600), ESP
application version 1.05 or later, and primary control version 3.4x or later.
You can see firmware and loading package versions in parameters.
Example:
Loading package versionParameter
AINFB or AINFC7.4 Firmware name
3.417.5 Firmware version
AESLB or AESLC7.6 Loading package name
1.09.0.07.7 Loading package version
This ESP application program is based on IEC standard 61131-3. It is an in-house
application, therefore the application code is locked and cannot be modified by
the user.
Licensing
The ESP control program (+N5600), version AESLx 1.00 or later comes with a license
key on the ZMU-02 memory unit. The program activates only after recognizing the
key and correspondingly registers itself with the ESP software.
1
Introduction to the manual 17
To Next Page
Loading...
