ABB ACS880 - Error Code Registers (Holding Registers 400090

Transparent profileABB drives profileReference
Status Word bit 27Reserved10028
Status Word bit 28Reserved10029
Status Word bit 29Reserved10030
Status Word bit 30Reserved10031
Status Word bit 31Reserved10032
10.2 DI delayed status, bit 0Reserved10033
10.2 DI delayed status, bit 1Reserved10034
10.2 DI delayed status, bit 2Reserved10035
10.2 DI delayed status, bit 3Reserved10036
10.2 DI delayed status, bit 4Reserved10037
10.2 DI delayed status, bit 5Reserved10038
10.2 DI delayed status, bit 6Reserved10039
10.2 DI delayed status, bit 7Reserved10040
10.2 DI delayed status, bit 8Reserved10041
10.2 DI delayed status, bit 9Reserved10042
10.2 DI delayed status, bit 10Reserved10043
10.2 DI delayed status, bit 11Reserved10044
10.2 DI delayed status, bit 12Reserved10045
10.2 DI delayed status, bit 13Reserved10046
10.2 DI delayed status, bit 14Reserved10047
10.2 DI delayed status, bit 15Reserved10048
Error code registers (holding registers 400090…400100)
These registers contain information about the last query. The error register is
cleared when a query has finished successfully.
DescriptionNameReference
1 = Reset internal error registers (91…95).Reset Error Registers90
Function code of the failed query.Error Function Code91
Set when exception code 04h is generated (see
table above).
Error Code92
• 00h No error
• 02h Low/High limit exceeded
• 03h Faulty Index: Unavailable index of an array
parameter
• 05h Incorrect Data Type: Value does not match
the data type of the parameter
• 65h General Error: Undefined error when
handling query
The last register (discrete input, coil, or holding
register) that failed to be read or written.
Failed Register93
726 Fieldbus control through the embedded fieldbus interface (EFB)