EasyManua.ls Logo

ABB ACS880 - Input References

ABB ACS880
764 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Def / Type
FbEq 16b / 32b
DescriptionName / Range /
Selection
No.
Values of references received from various sources.Input references3
All parameters in this group are read-only unless
otherwise noted.
0.00 / real32Local reference given from the control panel or PC tool.Panel reference3.1
10 = 1 / 100 = 1Local control panel or PC tool reference.-100000.00 ...
100000.00
- / real32Remote reference given from the control panel or PC
tool.
Panel reference 23.2
10 = 1 / 100 = 1Remote control panel or PC tool reference.-30000.00 ...
30000.00
0.00 / real32Reference 1 received through fieldbus adapter A.
See also chapter Fieldbus control through a fieldbus
adapter (page 729).
FB A reference 13.5
10 = 1 / 100 = 1Reference 1 from fieldbus adapter A.-100000.00 ...
100000.00
0.00 / real32Reference 2 received through fieldbus adapter A.FB A reference 23.6
10 = 1 / 100 = 1Reference 2 from fieldbus adapter A.-100000.00 ...
100000.00
0.00 / real32Reference 1 received through fieldbus adapter B.FB B reference 13.7
10 = 1 / 100 = 1Reference 1 from fieldbus adapter B.-100000.00 ...
100000.00
0.00 / real32Reference 2 received through fieldbus adapter B.FB B reference 23.8
10 = 1 / 100 = 1Reference 2 from fieldbus adapter B.-100000.00 ...
100000.00
- / real32Scaled reference 1 received through the embedded
fieldbus interface. The scaling is defined by 58.26 EFB
ref1 type.
EFB reference 13.9
10 = 1 / 100 = 1Reference 1 received through the embedded fieldbus
interface.
-30000.00 ...
30000.00
- / real32Scaled reference 2 received through the embedded
fieldbus interface. The scaling is defined by 58.27 EFB
ref2 type.
EFB reference 23.10
10 = 1 / 100 = 1Reference 2 received through the embedded fieldbus
interface.
-30000.00 ...
30000.00
- / real32Reference 1 received from the external (DDCS)
controller.
DDCS controller ref
1
3.11
The value has been scaled according to parameter
60.60 DDCS controller ref1 type.
See also section External controller interface (page 81).
10 = 1 / 100 = 1Scaled reference 1 received from external controller.-30000.00 ...
30000.00
- / real32Reference 2 received from the external (DDCS)
controller.
DDCS controller ref
2
3.12
The value has been scaled according to parameter 60.61
DDCS controller ref2 type.
Parameters 179

Table of Contents

Other manuals for ABB ACS880

Related product manuals