ABB ACS880 - Page 300

Def / Type
FbEq 16b / 32b
DescriptionName / Range /
Selection
No.
11Active (true)
2Digital input DI1 (10.2 DI delayed status, bit 0).DI1
3Digital input DI2 (10.2 DI delayed status, bit 1).DI2
4Digital input DI3 (10.2 DI delayed status, bit 2).DI3
5Digital input DI4 (10.2 DI delayed status, bit 3).DI4
6Digital input DI5 (10.2 DI delayed status, bit 4).DI5
7Digital input DI6 (10.2 DI delayed status, bit 5).DI6
8Supervision 1 active (32.1 Supervision status, bit 0).Supervision 1
9Supervision 2 active (32.1 Supervision status, bit 1).Supervision 2
10Supervision 3 active (32.1 Supervision status, bit 2).Supervision 3
11Motor temperature estimation is performed always
with drive start command.
Drive start
command
12Motor temperature estimation is performed once after
drive power-up (control board boot).
Drive power-up
4.0 s / real32Defines the motor temperature estimation time.
Motor temperature estimation is activated with
parameter 21.37 Motor temperature estimation.
Motor temperature
estimation time
21.38
10 = 1 s / 10 = 1 sMotor temperature estimation time in seconds.0.5 ... 20.0 s
300 Parameters