ABB ACS880 - Page 337

Def / Type
FbEq 16b / 32b
DescriptionName / Range /
Selection
No.
- / real32Displays the output of the proportional (P) part of the
speed controller. See the control chain diagram on page
750.
This parameter is read-only.
Torque prop
reference
25.53
- / -P-part output of speed controller. For scaling, see
parameter 46.3.
-30000.0 ... 30000.0
%
- / real32Displays the output of the integral (I) part of the speed
controller. See the control chain diagram on page 750.
This parameter is read-only.
Torque integral
reference
25.54
- / -I-part output of speed controller. For scaling, see
parameter 46.3.
-30000.0 ... 30000.0
%
- / real32Displays the output of the derivative (D) part of the
speed controller. See the control chain diagram on page
750.
This parameter is read-only.
Torque deriv
reference
25.55
- / -D-part output of speed controller. For scaling, see
parameter 46.3.
-30000.0 ... 30000.0
%
- / real32Displays the output of the acceleration compensation
function on page 750.
See the control chain diagram.
This parameter is read-only.
Torque acc
compensation
25.56
- / -Output of acceleration compensation function. For
scaling, see parameter 46.3.
-30000.0 ... 30000.0
%
- / real32Displays the acceleration-compensated output of the
speed controller. See the control chain diagram on page
750.
This parameter is read-only.
Torque reference
unbalanced
25.57
- / -Acceleration-compensated output of speed controller.
For scaling, see parameter 46.3.
-30000.0 ... 30000.0
%
Parameters 337