ABB ACS880 - Page 442

Def / Type
FbEq 16b / 32b
DescriptionName / Range /
Selection
No.
00Not selected
11Selected
2Digital input DI1 (10.2 DI delayed status, bit 0).DI1
3Digital input DI2 (10.2 DI delayed status, bit 1).DI2
4Digital input DI3 (10.2 DI delayed status, bit 2).DI3
5Digital input DI4 (10.2 DI delayed status, bit 3).DI4
6Digital input DI5 (10.2 DI delayed status, bit 4).DI5
7Digital input DI6 (10.2 DI delayed status, bit 5).DI6
10Digital input/output DIO1 (11.2 DIO delayed status, bit
0).
DIO1
11Digital input/output DIO2 (11.2 DIO delayed status, bit
1).
DIO2
See Terms and abbreviations (page 169).Other [bit]
No acknowledge /
uint32
Activates/deactivates (and selects the source for) brake
open/close status (acknowledgement) supervision.
When a brake control error (unexpected state of the
acknowledgement signal) is detected, the drive reacts
as defined by parameter 44.17 Brake fault function.
0 = Brake closed
1 = Brake open
Brake acknowledge
selection
44.7
00.Off
11.On
2Brake open/closed supervision disabled.No acknowledge
3Digital input DI1 (10.2 DI delayed status, bit 0).DI1
4Digital input DI2 (10.2 DI delayed status, bit 1).DI2
5Digital input DI3 (10.2 DI delayed status, bit 2).DI3
6Digital input DI4 (10.2 DI delayed status, bit 3).DI4
7Digital input DI5 (10.2 DI delayed status, bit 4).DI5
8Digital input DI6 (10.2 DI delayed status, bit 5).DI6
11Digital input/output DIO1 (11.2 DIO delayed status, bit
0).
DIO1
12Digital input/output DIO2 (11.2 DIO delayed status, bit
1).
DIO2
See Terms and abbreviations (page 169).Other [bit]
442 Parameters