Parameters and firmware blocks
126
Group 17 PANEL DISPLAY
Selection of signals for panel display.
17
17 PANEL DISPLAY
17.01 SIGNAL1 PARAM FW block: None
Selects the first signal to be displayed on the control panel. The default signal is 1.03 FREQUENCY.
Value pointer: Group and index
17.02 SIGNAL2 PARAM FW block: None
Selects the second signal to be displayed on the control panel. The default signal is 1.04 CURRENT.
Value pointer: Group and index
17.03 SIGNAL3 PARAM FW block: None
Selects the third signal to be displayed on the control panel. The default signal is 1.06 TORQUE.
Value pointer: Group and index
To Next Page
Loading...
