ABB ACSM1 - Group 10 START;STOP

Parameters and firmware blocks
101
Group 09 SYSTEM INFO
Drive type, firmware version, option slot information.
09
09 SYSTEM INFO
9.01 DRIVE TYPE FW block: None
Displays the drive application type.
(1) ACSM1 SPEED: Speed and torque control application
(2) ACSM1 MOTION: Motion control application
9.02 DRIVE RATING ID FW block: None
Displays the inverter type of the drive.
(0) UNCONFIGURED, (1) ACSM1-xxAx-02A5-4, (2) ACSM1-xxAx-03A0-4, (3) ACSM1-xxAx-04A0-4,
(4) ACSM1-xxAx-05A0-4, (5) ACSM1-xxAx-07A0-4, (6) ACSM1-xxAx-09A5-4,
(7) ACSM1-xxAx-012A-4, (8) ACSM1-xxAx-016A-4, (9) ACSM1-xxAx-024A-4,
(10) ACSM1-xxAx-031A-4, (11) ACSM1-xxAx-040A-4, (12) ACSM1-xxAx-046A-4,
(13) ACSM1-xxAx-060A-4, (14) ACSM1-xxAx-073A-4, (15) ACSM1-xxAx-090A-4,
(20) ACSM1-xxAx-110A-4, (21) ACSM1-xxAx-135A-4, (22) ACSM1-xxAx-175A-4,
(23) ACSM1-xxAx-210A-4, (24) ACSM1-xxCx-024A-4, (25) ACSM1-xxCx-031A-4,
(26) ACSM1-xxCx-040A-4, (27) ACSM1-xxCx-046A-4, (28) ACSM1-xxCx-060A-4,
(29) ACSM1-xxCx-073A-4, (30) ACSM1-xxCx-090A-4, (31) ACSM1-xxLx-110A-4,
(32) ACSM1-xxLx-135A-4, (33) ACSM1-xxLx-175A-4, (34) ACSM1-xxLx-210A-4,
(35) ACSM1-xxLx-260A-4
9.03 FIRMWARE ID FW block: None
Displays the firmware name. E.g. UMFI.
9.04 FIRMWARE VER FW block: None
Displays the version of the firmware package in the drive, e.g. 0x1460 (1460 hex).
9.05 FIRMWARE PATCH FW block: None
Displays the version of the firmware patch in the drive.
9.10 INT LOGIC VER FW block: None
Displays the version of the logic in the power unit interface.
9.20 OPTION SLOT 1 FW block: None
Displays the type of the optional module in option Slot 1.
(0) NO OPTION, (1) NO COMM, (2) UNKNOWN, (3) FEN-01, (4) FEN-11, (5) FEN-21, (6) FIO-01,
(7) FIO-11, (8) FPBA-01, (9) FPBA-02, (10) FCAN-01, (11) FDNA-01, (12) FENA-01, (13) FENA-02,
(14) FLON-01, (15) FRSA-00, (16) FMBA-01, (17) FFOA-01, (18) FFOA-02, (19) FSEN-01,
(20) FEN-31, (21) FIO-21
9.21 OPTION SLOT 2 FW block: None
Displays the type of the optional module in option Slot 2. See signal 9.20 OPTION SLOT 1.