ABB ACSM1 - 98 Motor Calc Values

Parameters and firmware blocks
241
Group 98 MOTOR CALC VALUES
Calculated motor values.
98
98 MOTOR CALC VALUES
98.01 TORQ NOM SCALE FW block: None
Nominal torque in N•m which corresponds to 100%.
Note: This parameter is copied from parameter 99.12 MOT NOM TORQUE if given. Otherwise the
value is calculated.
0…2147483 Nm Nominal torque.
98.02 POLEPAIRS FW block: None
Calculated number of motor pole pairs.
Note: This parameter cannot be set by the user.
0…1000 Calculated number of motor pole pairs.