PREPARING FOR INSTALLATION
FOX615Installation 33
Figure 17: 9 HU adapter for the installation of the cable tray, subrack
and fan unit in ETSI racks (left side adapter shown only)
Figure 18: 2 HU adapter for the installation of the heat deflection shield
R7AI in ETSI racks (left side adapter shown only)
The adapters contain integrated M6 nuts which fit to the holes of the FOX
equipment (19-inch mounting standard).
44.5 mm
76.2 mm
190.5 mm
44.5 mm
31.7 mm
399.2 mm
1.5 mm
41.1 mm
3
2
1
100.0 mm
175.0 mm
100.0 mm
76.2 mm
64.0 mm
1.5 mm
41.1 mm
4
To Next Page
Loading...