NoteAction
xx1500003082
Remove the base cover.5
Pull out the oil hose next to the connections
and attach the nipple. Connect the oil dis-
penser.
6
Suck out the oil with the oil dispenser.
Note
There will be some oil left in the gear after
draining.
7
WARNING
Used oil is hazardous material and must
be disposed of in a safe way. See section
Decommissioning on page 819 for more in-
formation.
8
Remove the oil dispenser.9
xx1600001405
Remove the oil filling nipple, put the protect-
ive cap on and put the oil filling hose into
the connection box.
10
Continues on next page
Product manual - IRB 8700 143
3HAC052853-001 Revision: F
© Copyright 2015-2018 ABB. All rights reserved.
3 Maintenance
3.4.2 Changing oil, axis-1 gearbox
Continued
To Next Page
Loading...
