3.4.6 Changing oil, axis-5 gearbox
Location of oil plugs
The oil plugs of the gearbox are located as shown in the figure.
xx1500002023
Right plugLeft plug
Oil plug drainingCombined oil plug filling/ventilation/inspec-
tion
Tightening torque: 24 Nm.Tightening torque: 24 Nm.
Required consumable
NoteMaterial
Information about the oil is found in Technical refer-
ence manual - Lubrication in gearboxes.
Lubricating oil
See Type and amount of oil in gearboxes on page 140.
Required tools and equipment
NoteArticle numberEquipment, etc.
The capacity of the vessel must be
sufficient to take the complete amount
of oil.
-Oil collecting vessel
Content is defined in section Standard
toolkit on page 833.
-Standard toolkit
Continues on next page
164 Product manual - IRB 8700
3HAC052853-001 Revision: F
© Copyright 2015-2018 ABB. All rights reserved.
3 Maintenance
3.4.6 Changing oil, axis-5 gearbox
To Next Page
Loading...
