ABB IRB 8700 Series - Risk of Tipping;Stability

2.2.3 Risk of tipping/stability
Risk of tipping
If the robot is not fastened to the foundation while moving the arm, the robot is not
stable in the whole working area. Moving the arm will displace the center of gravity,
which may cause the robot to tip over.
The shipping position is the most stable position.
Do not change the robot position before securing it to the foundation!
Shipping and transportation position
This figure shows the robot in its shipping position and transportation position.
xx1400002584
Move the robot to this position:
-90°Axis-1
-65°Axis-2
2°Axis-3
90°Axis-4
-90°Axis-5
0°Axis-6
WARNING
The robot is likely to be mechanically unstable if not secured to the foundation.
Product manual - IRB 8700 55
3HAC052853-001 Revision: F
© Copyright 2015-2018 ABB. All rights reserved.
2 Installation and commissioning
2.2.3 Risk of tipping/stability