6.2 Scrapping of robot
Important when scrapping the robot
DANGER
When a robot is disassembled while being scrapped, it is very important to
remember the following before disassembling starts, in order to prevent injuries:
• Always remove all batteries. If a battery is exposed to heat, for example
from a blow torch, it will explode.
• Always remove all oil/grease in gearboxes. If exposed to heat, for example
from a blow torch, the oil/grease will catch fire.
• When motors are removed from the robot, the robot will collapse if it is not
properly supported before the motor is removed.
Product manual - IRB 8700 821
3HAC052853-001 Revision: F
© Copyright 2015-2018 ABB. All rights reserved.
6 Decommissioning
6.2 Scrapping of robot
To Next Page
Loading...
