4.5.4 Replacing the turning disc
Location of the turning disc
The turning disk is located as shown in the figure.
xx1500002059
Required spare parts
Note
The spare part numbers that are listed in the table can be out of date. See the
latest revision of Product manual, spare parts - IRB 8700 on ABB Library.
NoteArticle numberSpare part
3HAC048445-003Turning disc
Required tools and equipment
NoteArticle numberEquipment, etc.
Content is defined in section Standard
toolkit on page 833.
-Standard toolkit
Continues on next page
342 Product manual - IRB 8700
3HAC052853-001 Revision: F
© Copyright 2015-2018 ABB. All rights reserved.
4 Repair
4.5.4 Replacing the turning disc
To Next Page
Loading...
