ABB IRB 8700 Series - Replacing the Brake Release Unit

4.4.4 Replacing the brake release unit
Location of the brake release unit
The brake release unit is located inside cover.
xx1500003096
Required spare parts
Note
The spare part numbers that are listed in the table can be out of date. See the
latest revision of Product manual, spare parts - IRB 8700 on ABB Library.
NoteArticle numberSpare part
Brake release unit DSQC1052
and harness
3HAC065021-001Brake release unit
Required tools and equipment
NoteArticle numberEquipment, etc.
Content is defined in section Standard
toolkit on page 833.
-Standard toolkit
Continues on next page
242 Product manual - IRB 8700
3HAC052853-001 Revision: F
© Copyright 2015-2018 ABB. All rights reserved.
4 Repair
4.4.4 Replacing the brake release unit